Customer Reviews

I'm using 0.5 mechanical pencils for about 30 years now and so far this is the very best lead I ever had!

Most curious: I tried this, Pilot Neox High-Purity Graphite Pencil Lead - 0.5 mm - F lead and the Pilot Neox High-Purity Graphite Pencil Lead - 0.5 mm - HB lead in my Roulette pencil. The "F" lead writes somewhat darker than the HB lead. Hardly what one would expect. I'm going with the "F" lead.

This lead is by far my favorite pencil lead now. I own every 0.5mm lead that Jetpens sells, and for the longest time the Pilot Eno lead was my favorite. I purchased this lead as it was released, and have had some time to play with it. This lead is by far the smoothest lead to write with. It feels like writing with a jetstream or vicuna ballpoint pens. The lead also seems to mark fairly dark for only being an HB lead. Keep in mind I'm not putting this stuff in a BIC pencil however. A solid pencil makes a difference.

I purchased Pilot Neox High-Purity Graphite Pencil Lead - 0.5 mm - HB, Uni-ball NanoDia Low-Wear Pencil Lead - 0.5 mm - HB, and Pentel Stein Enhanced Silica Pencil Lead - 0.5 mm - HB in one order, after looking at reviews for all the 0.5mm lead available on JetPens, trying to find the one that erased the best and was longest lasting. I compared all three in a Rotring 800, on Rhodia 80g paper(A very smooth paper), without twisting the pencil(So they were all worn to the same point when I wrote with them). This was my favorite of the bunch, being the easiest to erase by far, and erasing 100% completely from the page. The downside being, it did only last about 2/3 as long as the Uni-ball lead, and half as long as the Pentel lead. This left the darkest line of the three, with the other two being fairly equal. This was also the least likely to break of the three, being able to easily write with 10mm of lead outside of the pencil, if I was careful, although all three hold up MUCH better than the crap you usually find in stores(Pentel Hi-Polymer Super around here). Also, description is wrong, 0.5mm comes with 40 pieces, not 36.

Has a lot of lead. I don't know if it is weak because I only put a small amount of out of the tip of the pencil so my lead doesn't break that often.

Very smooth and easy to write with but smears much easier than the Pentel Stein Enhanced Silica Pencil Lead - 0.5 mm - HB Hard that I've used before. Certainly not bad but I'm going back to the Pentel lead, I HATE smearing.

The case is very easy to use and the leads come out one by one.

Good softness, not so light or dark on the paper, resistant to breakage at 2-3mm out of the pencil.

If you're looking for the lead that comes in the Pilot S20— this is it!

Pilot did a good job with this lead. It works well with my airblanc. The only problem I have with this lead is the lead case. The lead case only allows 1 lead to pass at one time and sometimes its a struggle trying to get lead out

Most curious: I tried this, Pilot Neox High-Purity Graphite Pencil Lead - 0.5 mm - HB lead and the Pilot Neox High-Purity Graphite Pencil Lead - 0.5 mm - F lead in my Roulette pencil. The "F" lead writes somewhat darker than the HB lead. Hardly what one would expect. I'm going with the "F" lead.

HELLO MY NAME IS BRANDON AND MY REVIEW IS ABOUT THE PILO NEOX HIGH PURITY GRAPHITE PENCIL LEAD.THE ONLY THING IS YOU CAN'T USE IT FOR OTHER MEACHANICAL PENCILS 0.5MM LEAD BECAUSE IT ONLY FOR PILOT NEOX HIGH PURITY GRAPHITE PENCIL LEAD.IT'S STRONGER AND IT WRITES REALLY GOOD I SAY IT'S THE BEST PENCIL LEAD EVER IN THE WORLD THENK YOU.