Note: for this mechanism to work and let you use your lead to the very last bit, an additional piece of lead must be loaded in the pencil body.
An ordinary pencil's clutch mechanism has an interspace that causes the lead to become weak and unstable. The OLEeNU addresses the issue of lead breakage through the implementation of four major features:
1. OLEeNU guard
In ordinary mechanical pencils, a gap exists between the mechanism that grasps the lead and the pencil tip, resulting in an unprotected lead piece that is easily broken from pressure or movement. The OLEeNU contains two additional clutch parts (blue and yellow pictured below) that hold the lead to avoid breakage.
2. Internal spring
An internal spring absorbs shock during writing to decrease lead breakage.
3. Sliding metal tip
The tip features a sliding metal sleeve that moves with the lead to give it extra support.
4. "Zero Shin"
Since the clutch of an ordinary mechanical pencil is located a slight distance from the tip, typically around 10-12 mm of lead is left unusable at the end (i.e. lead is too short for the pencil and must be thrown away). The two additional clutch pieces of the OLEeNU allow you to use lead up to 0.5 mm in length.
|Model Number||PLATINUM MOL-1000 1|
|Diameter - Grip||9.6 mm|
|Diameter - Max||10.7 mm|
|Knurled Finger Grip||No|
|Lead Diameter||0.5 mm|
|Lead Grade Indicator||No|
|Lead Sleeve Length||3.2 mm|
|Length - Body||14.5 cm|
|Length - Retracted||14.2 cm|